Professionelle Polycarbonat-Endbearbeitung
Durchgehende Präzisionsverarbeitung: Schneiden, Gravieren, Bohren, Kleben, Biegen, Fräsen, Polieren, Thermoformen, Tiefziehen, Siebdruck, UV-Druck.
Durchgehende Präzisionsverarbeitung: Schneiden, Gravieren, Bohren, Kleben, Biegen, Fräsen, Polieren, Thermoformen, Tiefziehen, Siebdruck, UV-Druck.
| 参数 | 数值/描述 | 标准 |
|---|---|---|
| Materials | PC 聚碳酸酯 | — |
| Processes | 裁切/雕刻/打孔/粘接/折弯/铣边/抛光/热成型/吸塑/丝印/UV印刷 | — |
| Precision | ±0.1mm | ISO 2768 |
| Product Forms | 板材/膜材精加工 | — |
| 参数 | 数值/描述 | 认证标准 |
|---|---|---|
| Cut Resistance | Level F (TDM) | EN 388 |
| Puncture Resistance | Level 4 | EN 388 |
| Tear Strength | ≥900-1300N | ASTM D2261 |
| Tensile Strength | ≥5500-7500N/50mm | ISO 13934-1 |
| Low-Temp Resistance | -50°C ~ 80°C | — |
| Chemical Resistance | Type B/C (>120min) | EN 374-3 |
Mechanischer Schutz
Authority: CEN
Chemikalienschutz
Authority: CEN
Zugfestigkeit Gewebe
Authority: ISO
Reißfestigkeit Gewebe
Authority: ASTM
Qualitätsmanagement
Authority: ISO
Note: Products are engineered to the above international standards. SGS/TÜV third-party testing supported. Contact marketing for current certificates.
Application data and case studies coming soon. Contact marketing for industry whitepapers.
Technisches Datenblatt
Sicherheitsdatenblatt
Prüfbericht
Disclaimer: Technical parameters are based on international standards and represent industry general reference ranges, not measured data. Actual parameters are subject to authoritative third-party test reports or certifications for the corresponding specific products. Product specifications are subject to change without notice.